Tensile Modulus:
273 Mpa ASTM D638-10
Safety in
Three Dimensions
Three Dimensions
Intumescent Thermoplastic Composite for Building Infrastructure
Properties
State
Solid
Colour
White
Specific Gravity
1.6 g/ml
Durameter Hardness(D)
1.54g/ml
Dielectric Strength
97 kV/mm
Hot Wire Ignition
120+s
Volume Resistivity
200 °C
Expansion Rate
1.8E16 ohm-cm
(35 ±1°C / 90 ± 2% RH)
Melting Point
132 °
Start Expansion
Temperature
120+s
Free Expansion Rate
10-15x
Tensile Strength:
8.5 Mpa ASTM D638-10
Tensile Elongation at yield:
51.0 % ASTM D638-10
Tensile Elongation at break:
57.0 % ASTM D638-10
Flexural Modulus:
327 Mpa ASTM D790-10
Flexural Yield Stress:
8.3 Mpa ASTM D790-10
Flexural Yield Displacement:
42.4 mm ASTM D790-10
Features
• Injection molded into custom shapes
• Custom extruded profiles
• Can be drilled, cut, milled, turned to various configurations
All Statements, technical information and recommendations contained herein are believed to be accurate and reliable but are presented without guarantee on our part. Values presented above are nominal and only to be used as guidelines.
